*The newer OMTech K40+ uses a different alignment tool than the K40. The K40+ uses the 16mm tool and requires this adaptor, sold separately.

**The newer OMTech AF heads use the 16mm tool and require this adaptor.

Extra AG3 batteries are included, however we recommend purchasing more to have as backup. Add 20 more for only $2.00!

Are you seeking a quicker and safer way to ensure precise lens head and mirror alignment for your Co2 laser cutter and engraving machine? Look no further than the American Photonics Mirror Alignment Tool, available in 12 different sizes.

Why Choose Our Alignment Tool?

✨ Precision Alignment: Achieve perfect alignment effortlessly. Our tool is designed to make the alignment process a breeze, ensuring your laser system operates at peak performance. 🎯

✨ 3rd Mirror Alignment: Unlike conventional methods that focus on the Z-axis of travel, our alignment tool allows you to align the 3rd mirror directly to your lens, reducing alignment complexities. 🪞

✨ Always-On Red Laser: We've integrated an always-on red laser into the tool, significantly speeding up the mirror 3 alignment process and enhancing safety. 🚀🔴

✨ Exact Center Representation: The reverse alignment tool precisely represents the center of your lens at 90 degrees +/- 3 minutes perpendicular, minimizing any deviations. 🎯📐

✨ Complementary Alignment: While the tool streamlines mirror 3 alignment, It can also help to get mirror 2 close when it is necessary to reposition the mirror holder. Please note that it does not replace the scorch method of aligning mirrors 1 and 2. 🔄

Whether you're a professional in the industry or a hobbyist, our Mirror Alignment Tool is designed to simplify your laser system's maintenance and ensure optimal performance.

📏 12 Sizes available form 16mm to 25mm🔌 Compatibility: Suitable for various mirror and lens sizes 🔋10 batteries included

Enhance Your Laser System's Performance Today!

Invest in the American Photonics Mirror Alignment Tool and experience quicker, safer, and more accurate mirror alignment for your Co2 laser cutter and engraving machine. Ensure your laser system delivers the precision you demand.

🔗 #LaserAlignment #MirrorAlignment #Co2LaserCutter #EngravingMachine #PrecisionAlignment #SafetyFirst #AmericanPhotonics

Disclaimer: American Photonics is your trusted partner for laser components and accessories. Our products are designed to enhance your laser system's performance. While we strive to provide accurate information, please note that actual product details may vary.

🛠️ Instructions for the Reverse Alignment Tool - Installation

Step 1: a- Remove the lens tube and insert the reverse alignment tool. b- Align mirror #3 on the head to mirror #2 on gantry (both near and far until the red dot does not move).

Step 2: a- Mirror #3 should be perfectly aligned! b- Lock it down, and do not touch the adjustment screws again!

Step 3: a- Align mirrors 1 and 2 conventionally.

Step 4: a- Reinstall the reverse alignment tool. b- Put tape over the laser entry hole on the laser head. c- Mark a target spot where the red dot hits the back side of the tape. d- Remove the alignment tool.

Step 6: a- Move the laser head to the farthest point away form the laser tube and pulse the laser marking the tape on the laser head. if the marked spot and the burn spot are not in the same location it will be necessary to make the final adjustment by moving the laser tube.

Your alignment is complete!

You may find an issue with your machine during this process: the four corners of your gantry may not be level.

When aligning mirror #3, please bring it to the front of your machine and then move it to the back.

If the alignment of your lenses is not perfect, your gantry is not square.

You will need to adjust the four corners of your machine to get your gantry square first. 📏🛠️